………
…………………………………………………………...
…………………………………………………………………………
Only trained personnel who knows how the lift works,
must be allowed to service the lift.
To service properly the lift, the following has to be carried out:
• use only genuine spare parts as well as equipment suitable for the work
•
follow the scheduled maintenance and check periods shown in the manual;
•
discover the reason for possible failures such as too much noise,
overheating, oil blow-by, etc.
Refer to documents supplied by the dealer to carry out maintenance:
•
functional drawing of the electric/
Pneumatic
and hydraulic equipment
• exploded views with all data necessary for spare parts ordering
• list of possible faults and relevant solutions.
Before carrying out any maintenance or repair on the
lift, disconnect the power supply, padlock the general
switch and keep prevent unauthorized persons from
switching on or operating the lift.
8.1 Ordinary Maintenance
The lift has to be properly cleaned at least once a month using self-cleaning clothes. Lubricate all pivot pins at
The use of water or in
fl
ammable liquid is strictly
forbidden.
Be sure the rod of the hydraulic cylinders is always clean and not damaged since this may result in leakage
from seals and, as a consequence, in possible malfunctions.
To Next Page
Loading...