……………………………………………………………...
………………………………………………………………………….
6.4 Make The Electrical Hookup To Hydraulic Power
Unit
The hookup work must be carried out by a quali
fi
ed electrician.
Make sure that the power supply is right.
Make sure the connection of the phases is right. Improper
electrical hook-up can damage motor and will not be covered
DO NOT run the hydraulic unit with no oil. Damage to pump can
The power unit must be kept dry.
•
Make the electric hookup to the power unit referring to the attached using
the included electric cable.
• Make sure the connection of the phases is right and lift is grounded.
Lower Limit Switch
connection
To Next Page
Loading...