……… …………………………………………………………...
…………………………………………………………………………
6.8 Checking With Load
WARNING: The lift must be raised at least 12” out of the
ground before taking the load.
It is extremely forbidden to load the vehicle when the lift
wheels are on the lift. Failure to do so can damage the lift
Carry out two or three complete cycles of lowering and lifting and check:
•
the safety devices for proper operation
• proper oil level in the tank
• no leakage and blow-by in hydraulic line and pneumatic line
•
cylinder for proper operation
•
the lift for reaching its maximum height
• the horn/signaling light for proper operation during the
fi
naltravel
Check no strange noise during lifting and lowering
To Next Page
Loading...