3
• Resetting data
• Fail-safe emergency rates
• Dual rates
• Rate progression setting along 2 exponential curves
or 21-point curves.
• Freely programmable mixes
• Engine shutdown
• Safe idle
• Logically linked switches
• Intuitive user menu with customizable widgets
• Servo monitor and servo tester
• Three timers (stopwatch or timer)
• Model run time
• Transmitter run time
• Indication of preset controller positions when the
transmitter is started
• Adjustable display backlight intensity
• Calibration of gimbals
• Sound and vibration warning alerts
• Range check
• Setting operation with 3 receivers
1. 4,3“ LCD 800×480 px
2. 2-way switch #6
3. 3-way switch #5
4. 3-way switch #2
5. 3-way switch #1
6. Side rotary dial #1
7. Programmable mix knob #1
8. Left gimbal
9. Trim #3
10. Power button
11. Trim #4
12. Speaker
13. SYS/MOD/DISP/BACK
14. 2-way momentary switch #8
15. 3-way switch #7
16. 3-way switch #3
17. 3-way switch #4
18. Side rotary dial #2
19. Programmable mix knob #2
20. Right gimbal
21. Trim #2
22. Lanyard hook
23. Trim #1
24. User programmable buttons
25. Programmable slider
26. Multifunction knob
TRANSMITTER DESCRIPTION
To Next Page
