Kawai CS8 - Software

P35 Software
CS8
How to rewrite the Flash ROM program by USB Memory.
1. Copy ｢CS8_060.SYS｣to root folder of USB Memory from SYS folder of CD-R.
(Don't copy other .SYS files to same USB memory.)
2. Insert USB Memory to ｢USB to device｣ jack of CS8.
3. Power on CS8 while holding [1],[2],[3] buttons.
4. Wait until ｢Boot End｣ appear on the LCD.
5. For turn off the power press and hold the power SW [5 seconds.]. Then release.
How to change the destination.
1) Changing for CD,GE market
Power ON while holding [VOCAL&PAD],[REGISTRATION],「PIANO1] button.
2) Changing for US market
Power ON while holding [VOCAL&PAD],[REGISTRATION],「PIANO2] button.
3) Changing for CG,AU market
Power ON while holding [VOCAL&PAD],[REGISTRATION],「E.PIANO] button.
4)
Changing for Japanese market
Power ON while holding [VOCAL&PAD],[REGISTRATION],「ORGAN] button.
How to identify the destination.
Power ON while holding [VOCAL&PAD],[REGISTRATION] button.
Display is 「EU」 for CD,GE or CG , ｢US｣ for US , 「AU」 for AU , 「JP」 for Japan market.
How to display the checksum.
Power on CS8 while holding [ORGAN],[HARPSI&MALLETS],[STRINGS] buttons.