Kawasaki FE290 - User Manual

To Next Page

286cm

7.1kW (9.5Hp) / 3600rpm

Let the good times roll.

OUTPUT

2000

3000

3600

ENGINE SPEED rpm

N-m

TORQUE

ft.lbs

TORQUE

MAXIMUM OUTPUT

RECOMMENDED

MAXIMUM OUTPUT

SPECIFICATIONS

Engine Type Forced air cooled 4-stroke,

horizontal shaft,

OHV gasoline engine

Number of Cylinder 1

Bore x Stroke 78 x 60mm ( 3.07 x 2.36in. )

Piston Displacement 286cm

( 17.5cu.in. )

Compression Ratio 8.4 : 1

Maximum Power 7.1kW ( 9.5Hp ) / 3600rpm

Maximum Torque 18.6N-m ( 13.7ft.lbs ) / 2500rpm

Direction of Rotation Counter-clockwise facing the

PTO shaft

Fast Idle Speed 4000rpm

Slow Idle Speed 1300rpm

Fuel Unleaded gasoline

Fuel Tank Capacity 6.0litre ( 6.3US.qt. )

Min. Fuel

322gr / kW-hr ( 240gr / Hp-hr )

Consumption Ratio

Oil Gasoline engine oil SAE10W-30

Oil Capacity 1.1litre ( 1.2US.qt. )

Carburetor Float type with fixed main jet

*Anti-dust & anti-corrosion type

Balancing Reciprocating balancer

Ignition Flywheel magneto transistor type

Plug NGK BP5ES

*RFI plug is also available

Starter Recoil starter with

Automatic Compression Release

*Electric starter is also available

Governor Mechanical governor

Lubrication Full pressure lubrication

with low oil shut-off system

Spin-on oil filter is also available

Air Cleaner Dual element

Oil bath type is also available

Muffler Low tone type

*Adjustable deflector is also

available

Lighting Coil *6V-15W or 12V-25W is also

available

Charging Coil

2A, 4A or 13A is also available

**Dry Weight 30.4kg ( 67.0Ibs )

**Dimension 363 x 408 x 441mm

( L x W x H ) ( 14.29 x 16.06 x 17.36in. )

FE290G 2 : 1 Cam Gear Reduction

Specifications subject to change without notice.

Note : ** Recoil starter and metric straight PTO Shaft.

PERFORMANCE CURVES

OVER HEAD VALVE

FULL PRESSURE LUBRICATION

CAST - IRON CYLINDER LINER

RECIPROCATING BALANCER

Need help?

Do you have a question about the Kawasaki FE290 and is the answer not in the manual?

Summary

Engine Specifications

General Engine Attributes

Details engine type, cylinder, bore, stroke, displacement, and compression ratio.

Power and Speed Ratings

Covers maximum power output, maximum torque, and idle speed specifications.

Fuel, Oil, and Lubrication

Specifies fuel type, tank capacity, consumption, oil type, capacity, and lubrication system.

Key Components and Systems

Details carburetor, ignition, starter, governor, air cleaner, and muffler.

Electrical and Physical Data

Includes lighting coil, charging coil, dry weight, and overall dimensions.

Performance Curves

Output vs. Engine Speed

Graph showing kW and Hp output relative to engine speed.

Torque vs. Engine Speed

Graph showing torque in Nm and ft.lbs relative to engine speed.

Dimensional Specifications

Overall Engine Dimensions

Main engine dimensions with metric and imperial measurements.

FE290 D Shaft Variations

Details on FE290D straight shaft options in metric and inch.

FE290 G PTO Flange and Shaft

Details on FE290G PTO flange and tapered shaft options in inch.