Kawasaki FE400 - User Manual

401cm
3
,9.7kW (13.0Hp) / 3600rpm
Let the good times roll.
13
5
6
7
8
9
10
11
12
Hp
5
4
3
7
6
10
9
8
kW
OUTPUT
2000
3000
3600
ENGINE SPEED rpm
20
18
19
ft.lbs
28
27
26
25
N-m
TORQUE
21
TORQUE
MAXIMUM OUTPUT
RECOMMENDED
MAXIMUM OUTPUT
SPECIFICATIONS
Engine Type Forced air cooled 4-stroke,
horizontal shaft,
OHV gasoline engine
Number of Cylinder 1
Bore x Stroke 87 x 67.5mm ( 3.43 x 2.66in. )
Piston Displacement 401cm
3
( 24.5cu.in. )
Compression Ratio 8.3 : 1
Maximum Power 9.7kW ( 13.0Hp ) / 3600rpm
Maximum Torque 26.5N-m ( 19.6ft.lbs ) / 2500rpm
Direction of Rotation Counter-clockwise facing the
PTO shaft
Fast Idle Speed 4000rpm
Slow Idle Speed 1300rpm
Fuel Unleaded gasoline
Fuel Tank Capacity 6.4litre ( 6.8US.qt. )
Min. Fuel
350gr / kW-hr ( 261gr / Hp-hr )
Consumption Ratio
Oil Gasoline engine oil SAE10W-30
Oil Capacity 1.3litre ( 1.4US.qt. ) with Filter
Carburetor Float type with fixed main jet
*Anti-dust & anti-corrosion type
Balancing Reciprocating balancer
Ignition Flywheel magneto transistor type
Plug NGK BP5ES
*RFI plug is also available
Starter Recoil starter with
Automatic Compression Release
*Electric starter is also available
Governor Mechanical governor
Lubrication Full pressure lubrication
with spin-on oil filter & low oil
shut-off system
Air Cleaner Dual element
Muffler Low tone type
*Adjustable deflector is also
available
Lighting Coil *6V-15W or 12V-25W is also
available
Charging Coil *2A, 4A or 13A is also available
Valve Adjuster Hydraulic Lash Adjuster
**Dry Weight 34.5kg ( 76.1Ibs )
**Dimension 380 x 422 x 461mm
( L x W x H ) ( 14.96 x 16.61 x 18.15in. )
FE400G 2 : 1 Cam Gear Reduction
Specifications subject to change without notice.
Note : ** Recoil starter and metric straight PTO Shaft.
PERFORMANCE CURVES
OVER HEAD VALVE FULL PRESSURE LUBRICATION HYDRAULIC LASH ADJUSTER CAST - IRON CYLINDER LINER RECIPROCATING BALANCER

Summary

Kawasaki FE400 Engine Specifications

Engine Type, Power, and Torque Specs

Details engine type, displacement, power output, torque, fuel type, and tank capacity.

Lubrication, Cooling, and Air Systems

Covers oil specifications, lubrication, air cleaner, muffler, lighting, and charging coils.

Ignition, Starter, and Weight Details

Includes ignition, starter, governor, balancing, plug type, dry weight, and dimensions.

Engine Performance Curves

Graphic representation of engine power and torque output versus engine speed.

Kawasaki FE400 Dimensional Drawings

Overall Engine Dimensions

Provides overall engine dimensions (length, width, height) in mm and inches.

Shaft Variations and PTO Details

Shows metric straight shaft and PTO flange shaft dimensions.

Kawasaki FE400 Specifications