EasyManua.ls Logo

Kawasaki MULE PRO - User Manual

Kawasaki MULE PRO
4 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Parts List:
Ref. # Qty
A01 1
A02 2
A03 4
Parts Diagram:
Soft Top
Fiberglass Rod
Snap Clamp
To avoid damage and the wind adversely affecting the vehicle, transport it in an enclosed truck or trailer.
If an enclosed transporter is not available, remove the soft top and position the vehicle facing forward.
NOTICE
Assembly Instructions
Improper installation of this accessory could result in an accident causing serious bodily injury or death. To
prevent an accident, be sure that this accessory is properly and securely installed on your vehicle. If you cannot
properly install this accessory yourself, have a professional installer, such as an authorized Kawasaki dealer,
install it for you.
Prior to each use, check to be sure the accessory is securely attached to the vehicle and periodically inspect the
accessory for any required adjustment, wear, and damage.
Description
Model
MULE PRO
(SINGLE ROW)
Part Number
KAF080-071 (black)
KAF080-072 (camo)
Description
SOFT TOP
Approx. Assembly
Time
30 MIN
WARNING
A01
A02
© 2015 Kawasaki Motors Corp., USA Page 1 of 4 inst-KAF080-071_rev04
Question and Answer IconNeed help?

Do you have a question about the Kawasaki MULE PRO and is the answer not in the manual?

Summary

Assembly Overview and Safety

Safety Warning

Improper installation can cause injury or death; ensure professional installation if unsure.

Transportation Notice

Transport vehicle with soft top in an enclosed truck or trailer to prevent damage and wind effects.

Soft Top Installation Steps

Initial Preparation and Front Strap Attachment

Prepare vehicle, place soft top, and thread front straps around A-pillar and through buckles.

B-Pillar Strap Installation and Rod Assembly

Install B-pillar straps, snap clamps onto fiberglass rods, and position rod assemblies.

Rear Strap and Windshield Fastener Attachment

Attach rear middle strap, front crossbar hook and loop, and windshield fastener if applicable.

Final Adjustment and Inspection

Adjust front and rear straps for a snug fit and inspect all fasteners for tightness.

Summary

Assembly Overview and Safety

Safety Warning

Improper installation can cause injury or death; ensure professional installation if unsure.

Transportation Notice

Transport vehicle with soft top in an enclosed truck or trailer to prevent damage and wind effects.

Soft Top Installation Steps

Initial Preparation and Front Strap Attachment

Prepare vehicle, place soft top, and thread front straps around A-pillar and through buckles.

B-Pillar Strap Installation and Rod Assembly

Install B-pillar straps, snap clamps onto fiberglass rods, and position rod assemblies.

Rear Strap and Windshield Fastener Attachment

Attach rear middle strap, front crossbar hook and loop, and windshield fastener if applicable.

Final Adjustment and Inspection

Adjust front and rear straps for a snug fit and inspect all fasteners for tightness.

Kawasaki MULE PRO Specifications

General IconGeneral
BrandKawasaki
ModelMULE PRO
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals