kd frames Nomad Bed User Manual

N-8 DECK
SUPPORTS (4)
INSTRUCTIONS
Nomad Bed
N-1 BED PANELS (2)
1
H-4
N - 8
Attach (2) Deck
Supports to each
Bed Panel
NOTE:
THIS FRAME IS MADE WITH TULIP POPLAR. THE GREENISH COLOR
OF THE HEARTWOOD WILL CHANGE TO A LIGHT BROWN OVER
TIME. YOU CAN PLACE THE FRAME IN DIRECT SUNLIGHT FOR
ONE HOUR TO COMPLETELY CHANGE THE GREEN TO BROWN.
BED PANELS
N-1
2
PARTS LIST
N-8
DECK SUPPORTS
4
16
1
H-10
HEX WRENCH
N-2
BED ENDS
H-1
70mm BOLT
2
H-4
50mm SCREW
8
N-1
N-8
N-2 BED ENDS (2)
H-3
CROSS DOWEL
16
290 Dairy Pak Rd. • Athens, GA 30607 • 800 - 543 - 3393
Manufactured by
Queen and Full

kd frames Nomad Bed Specifications

General

Brand	kd frames
Model	Nomad Bed
Category	Indoor Furnishing
Language	English

Summary

Nomad Bed Parts Identification

Component List

Lists all bed components including panels, supports, ends, bolts, screws, wrench, and dowels.

Material Information

Details the tulip poplar wood composition and its color change properties in sunlight.

Assembly Step 1

Attach Deck Supports to Bed Panels

Instructions and diagram for attaching two deck supports to each bed panel using screws.

Assembly Step 2

Connect Bed Ends to Bed Panels

Guide for attaching bed ends to bed panels, ensuring pocket screws face inward and leaving bolts loose initially.

Post-Assembly Tightening and Care

Advice to tighten all bolts after attaching both bed ends and to retighten them after 30 days.

Product Warranty Information

Five-Year Limited Warranty Details

Outlines the five-year warranty against defects in materials and workmanship, including exclusions and contact information.