kd frames KD Lounger Full User Manual

PARTS
Instructions for:
Manufactured by:
(2) K-22 SEAT SLAT - 52”
(2) K-23 LOUNGER SLAT - 52”
(2) K-2L SEAT RAIL - 37”
(7) K-24 MIDDLE SLAT - 48”
K-6L BACK LEG (Left) (1)
K-6R BACK LEG (Right) (1)
K-25
K-4
H-19
2
(4) K-15 SLAT CAP - 20”
PARTS LIST
BACK RAIL
K-1
2
K-2
2
SEAT RAIL
2
PROP
K-4
K-25
1
PROP CONNECTOR
4
4
8
K-16
11” LOUNGER SLAT CAPS
2
K-24
MIDDLE SLATS
7
32
H-11
WOOD DOWEL
20
H-19
1 - 3/4” WOOD SCREW
K-3
2
LOUNGER RAIL
2
K-6
BACK LEG (Left and Right)
2
K-7
SEAT LEG
2
K-8
LOUNGER LEG
K-22
2
SEAT SLATS
K-23
2
LOUNGER SLATS
K-15
20” SLAT CAPS
4
K-21
BACK SLATS
2
(2) K-7 SEAT LEG - 9”
(2) K-21 BACK SLAT - 52”
(1) K-25 PROP CONNECTOR - 44”
(2) K-3 LOUNGER RAIL - 24”
(2) K-16 LOUNGER SLAT CAP - 11”
(2) K-8 LOUNGER LEG - 9”
(2) K-4 PROP - 15”
(2) K-1 BACK RAIL - 29”
Press the Prop Connector (K-25) onto
the Wood Dowels on the Props (K-4)
and attach with Wood Screws (H-19).
H-8
2-1/4” CLEVIS PIN
H-5
HAIR PIN
H-12
3-1/4” CLEVIS PIN
394 Dairy Pak Rd. • Athens, GA 30607
kdframes.com • alan@kdframes.com
(1) K-29 LEG CONNECTOR - 38”
1
K-29
LEG CONNECTOR
v. 111
Push Wood Dowels (H-11)
all the way into holes as
shown.
1
K-2L SEAT RAIL (2)
K-3 LOUNGER RAIL (2)
K-4 PROP (2)
K-1 BACK RAIL (2)
K-8 LOUNGER LEG (2)
sku# 7832-KD-F
KD Lounger Full

kd frames KD Lounger Full Specifications

General

Brand	kd frames
Model	KD Lounger Full
Category	Indoor Furnishing
Language	English

Summary

KD Lounger Full Assembly Instructions

Parts Identification and List

Lists all components and quantities required for KD Lounger Full assembly.

Initial Component Preparation

Instructions for inserting wood dowels and connecting props before main assembly.

Step-by-Step Assembly Guide

Attaching Back Rails and Prop Assembly

Connects back rails to the prop assembly using clevis pins and hair pins.

Assembly Verification and Back Leg Attachment

Checks assembly accuracy and secures back legs to back rails.

Seat Rail Installation

Attaches seat rails using clevis pins and secures back legs with screws.

Completing Lounger Construction

Attaching Seat Legs and Lounger Rails

Connects seat legs and lounger rails to seat rails with clevis pins.

Lounger Leg and Connector Assembly

Secures lounger legs to lounger rails and attaches the leg connector.

Slat Deck Installation

Attaches various slats (middle, back, seat, lounger) to slat caps.

Final Assembly and Operation

Final Slat Deck Attachment

Attaches the slat decks to the frame using wood screws.

Lounger Operation Modes

Illustrates different positions: Bed, Lounger with footrest flat/down, and Sofa.

Material and Warranty Information

Details on wood type, finishing, and the manufacturer's five-year warranty.