KDK 24CURB - Page 12

12
Vent cap
管盖
Adhesive tape
(not supply)
胶带(另购)
Inside
内侧
Outside
外侧
Gradient
斜度
Wall
墙壁
Duct (not supply)
管道(另购)
1
100
1
50
Pipe hood
(not supply)
管罩(另购)
1 Insert the duct (not supply) into the adaptor and secure it with adhesive tape (not supply) tightly.
Suspend the duct from the ceiling so that no force is applied to the fan body. Install the duct
horizontally with a gradient downwards to the outside. And the outlet of duct shall be located to avoid
the rain ingress.
将管道(另购)装入接头组合上，然后用胶带(另购)粘紧密闭，防止漏风。将管道悬挂在天花板上，
以防止外力施加于机体。管道水平向下倾斜的安装到外侧，其出口应设置在避免雨水进入的地方。
2. Connect duct
2.管道连接
The minimum diameter of the wall hole :
ø116 mm
墙壁的最小开口尺寸为:116 mm。
2 Insert the pipe hood or vent cap
(optional accessories) on the outer wall.
将管盖或管罩(需要另外选购)安装到墙外。
Notice
提示事项
MCX100K
VCX100K
HOW TO INSTALL
安装方法
Pipe hood
管罩