Keba KeControl CP 507/C User Manual

CP 503/A, CP 505/A,D,K, CP 507/
A,C
Operating behavior
Project engineering manual V1.06
60
© KEBA 2021
Displayed state
(continue with short key press)
Action
(execute with long key press)
Perform software update
No software updates available. The
operation must be confirmed by a
long key press.
Number of available software up-
dates found. The update process
must be started by a long key-
stroke. The process may take some
time.
Error during the update process
(e.g. USB stick not found, directory
incorrect, etc.). The error must be
confirmed by a long keystroke.
RUN
Displayed state
(continue with short key press)
Action
(execute with long key press)
Controller is in RUN state. Go to action: stop controller
Stop controller The controller goes to STOP state.
Stop controller The controller is stopped.
Trigger reboot A restart is performed.
Reboot controller
A reboot of the controller is per-
formed.
IP-Show address
The IP address is displayed 3 times
in a row and each digit for 1 s.
Write status report The status report is written.
Write SysStatus report The SysStatus report is written.
Copy crash report
The crash report is copied to the
root directory of the plugged USB
stick. The process may take some
time.
Error while copying data (e.g. USB
stick removed during copying, no
space left on USB stick, etc.). The
error must be confirmed by a long
keystroke.

Keba KeControl CP 507/C Specifications

General

Brand	Keba
Model	KeControl CP 507/C
Category	Computer Hardware
Language	English