Need help?Do you have a question about the Keba KeControl CP 505/A and is the answer not in the manual?
General| Operating Temperature | 0°C to +50°C |
|---|---|
| Processor | Intel Atom |
| Operating Voltage | 24 V DC |
| Relative Humidity | non-condensing |
| Touchscreen | Yes |
| Interfaces | Ethernet, USB, RS232 |
| Certifications | CE, UL |
Provides essential safety warnings and exclusions for the CP 50x/x, including installation in control cabinets.
Details safety precautions for maintenance, emphasizing trained personnel and warranty implications.
Offers guidance on handling electronic components to prevent damage from electrostatic discharge (ESD).
Explains the 7-segment diagnostic display used for start-up and operating modes.
Details the status LED on the module, its display states, and their corresponding meanings.
Describes the function of the control key for operating modes and issuing commands, including key press durations.
Provides general safety precautions for assembly, installation, and removal of modules.
Specifies the use of TS 35x7.5 mounting rails and screw distance requirements for stability.
Explains the function and material requirements for end brackets to secure modules on the mounting rail.
Details the ventilation slots for heat dissipation and the caution regarding keeping them clear.
Guides on the correct installation procedure for the module on a mounting rail, emphasizing orientation.
Provides instructions for safely removing the module from the mounting rail, including power disconnection.
Explains how to add expansion and input/output modules to the CP 50x/x via plug connections.
Details the step-by-step process for adding input/output modules to the module package.
Provides instructions for adding expansion modules to the module, including securing the lock.
Guides on the procedure for removing input/output modules from the module package.
Details the steps required to safely remove expansion modules from the module.
Discusses heat dissipation requirements, permissible ambient temperatures, and the importance of ventilation.
Details the EtherCAT interface for real-time networks, including its pin assignment.
Describes the Gigabit Ethernet interfaces for non-real-time networks and their pin assignments.
Details the CAN interface, pin assignment, bus termination, and connection examples.
Explains CAN bus termination and provides a connection example for the CAN circuit.
Details the RS-232-C serial interface, its pin assignment, and bus termination.
Details the RS-422-A interface, its pin assignment, and bus termination requirements.
Details the nominal supply voltage, inrush current, and total power consumption for CP 503/x and CP 505/x.
To Next Page