EasyManuals Logo

Keebox W150NR User Manual

Keebox W150NR
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #60 background imageLoading...
Page #60 background image
60
If the user wants to limit to specific the IP address to access, please input in the item. The
default 0.0.0.0 and means every IP of Internet can get some information of device with SNMP
protocol.
Click on “Save” to store your setting or “Undo” to give up.
3.3.4.5 Routing
Routing Tables allow you to determine which physical interface address to use for outgoing IP
data grams. If you have more than one routers and subnets, you will need to enable routing
table to allow packets to find proper routing path and allow different subnets to communicate
with each other.
Routing Table settings are settings used to setup the functions of static.
Dynamic Routing
Routing Information Protocol (RIP) will exchange information about destinations for computing
routes throughout the network. Please select RIPv2 only if you have different subnet in your
network.
Otherwise, please select RIPv1 if you need this protocol.

Other manuals for Keebox W150NR

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Keebox W150NR and is the answer not in the manual?

Keebox W150NR Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Modulation16-QAM, 64-QAM, BPSK, CCK, DBPSK, DQPSK, OFDM, QPSK
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Channels quantity13 channels
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)150 Mbit/s
Input current1 A
Rack mounting-
Frequency range2.4 - 2.4835 GHz
Minimum system requirements- Internet Explorer 6.0, Firefox, Safari, Chrome
WLAN data transfer rates supported11, 54, 150 Mbit/s
Ethernet LAN (RJ-45) ports5
Routing protocolsRIP-1, RIP-2
Supported network protocolsPPPoE, PPTP, L2TP
Antennas quantity1
Antenna gain level (max)17 dBi
Security algorithms128-bit WEP, 64-bit WEP, WPA, WPA2-PSK
Certification- CE, FCC
Storage temperature (T-T)-10 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95 %
Product colorWhite
Cables includedLAN (RJ-45)
Weight and Dimensions IconWeight and Dimensions
Depth110 mm
Width150 mm
Height25 mm
Weight200 g