1 Contents 1
2 Packing list
2.1 Unpacking your machine
3 Assembly
3.1 Adjusting the Legs
3.2 Preparing to fit the Squaring arm
3.3 Fitting the Squaring arm
3.4 Fitting the Wall mounting bracket
3.5 Fitting the Free standing kit
3.6 Fitting the Backing panels
4 Squaring
4.1 Checking your machine for squareness
4.2 Adjusting the squareness
5 Calibration
5.1 Calibrating the vertical square
5.2 Calibrating the Squaring arm scale
5.3 Fitting the Sight-line strip
6 Operation
6.1 Using the Clamp
6.2 The Multi-tool cutter and the Counterbalance – 5000
6.2.
1
The Cutting blade
6.2.2
The Scoring blade
6.2.
3 The Glass cutter
6.3 The Twin wheel cutter – 5000
7 Maintenance
7.1 General maintenance
To Next Page
Loading...
Need help?
General
