SteelTrak User Guide –
Maintenance
The world’s finest cutting machines
www.keencut.com
+44 (0) 1536 263158
+1 (716) 748 6203
sales@keencut.co.uk (UK HQ)
sales@keencut.com (US sales)
Scan the QR code or
click here to view this document online >
Page 5 of 6
Tighten the two locking nuts whilst holding the adjuster in
position with the second spanner, then operate the clamp a few
times, check and adjust further if necessary.
Finally, replace the plastic cover strip.
To Next Page
Loading...
