KEENZ 7S - Usos Múltiples

78
PARCEL BAG
The photo above shows the parcel bag
mounted at the front of the wagon. It
can be moved to the rear or removed
completely from the wagon
STEP 1: If parcel bag is folded up, undo
buckle to expand parcel bag.
THE PARCEL BAG CAN BE MOVED TO THE OTHER SIDE OF WAGON
STEP 2: Make sure parcel bag is empty before
attempting to remove it from the wagon
STEP 3: Place one hand on bumper for
leverage and position parcel bag at an angle.
PULL OUT AT ANGLE to release parcel bag and
remove from wagon.
STEP 4: Go to front of wagon and locate
mounting points for parcel bag.
STEP 2: Position parcel bag at angle that
matches up with mounting points. Push parcel
bag into mounting points to secure to frame.
MAKE SURE THE MOUNTS LINE UP CORRECTLY!
PARCEL BAG
The photo above shows the parcel bag
mounted at the front of the wagon. It
can be moved to the rear or removed
completely from the wagon
STEP 1: If parcel bag is folded up, undo
buckle to expand parcel bag.
THE PARCEL BAG CAN BE MOVED TO THE OTHER SIDE OF WAGON
STEP 2: Make sure parcel bag is empty before
attempting to remove it from the wagon
STEP 3: Place one hand on bumper for
leverage and position parcel bag at an angle.
PULL OUT AT ANGLE to release parcel bag and
remove from wagon.
STEP 4: Go to front of wagon and locate
mounting points for parcel bag.
STEP 2: Position parcel bag at angle that
matches up with mounting points. Push parcel
bag into mounting points to secure to frame.
MAKE SURE THE MOUNTS LINE UP CORRECTLY!
PARCEL BAG
The photo above shows the parcel bag
mounted at the front of the wagon. It
can be moved to the rear or removed
completely from the wagon
STEP 1: If parcel bag is folded up, undo
buckle to expand parcel bag.
THE PARCEL BAG CAN BE MOVED TO THE OTHER SIDE OF WAGON
STEP 2: Make sure parcel bag is empty before
attempting to remove it from the wagon
STEP 3: Place one hand on bumper for
leverage and position parcel bag at an angle.
PULL OUT AT ANGLE to release parcel bag and
remove from wagon.
STEP 4: Go to front of wagon and locate
mounting points for parcel bag.
STEP 2: Position parcel bag at angle that
matches up with mounting points. Push parcel
bag into mounting points to secure to frame.
MAKE SURE THE MOUNTS LINE UP CORRECTLY!
PARCEL BAG
The photo above shows the parcel bag
mounted at the front of the wagon. It
can be moved to the rear or removed
completely from the wagon
STEP 1: If parcel bag is folded up, undo
buckle to expand parcel bag.
THE PARCEL BAG CAN BE MOVED TO THE OTHER SIDE OF WAGON
STEP 2: Make sure parcel bag is empty before
attempting to remove it from the wagon
STEP 3: Place one hand on bumper for
leverage and position parcel bag at an angle.
PULL OUT AT ANGLE to release parcel bag and
remove from wagon.
STEP 4: Go to front of wagon and locate
mounting points for parcel bag.
STEP 2: Position parcel bag at angle that
matches up with mounting points. Push parcel
bag into mounting points to secure to frame.
MAKE SURE THE MOUNTS LINE UP CORRECTLY!
COMPARTIMIENTO DE ALMACENAMIENTO
EL COMPARTIMIENTO DE ALMACENAMIENTO PUEDE SER
MOVIDO AL OTRO LADO DE LA VAGON CARRIOLA
USOS MÚLTIPLES
La foto de abajo muestra el compartimiento de
almacenamiento montado en la parte delantera
del carro. Se puede mover hacia atrás o quitar
completamente.
ABRIENDO EL COMPARTIMIENTO DE
ALMACENAMIENTO
Si el compartimiento de almacenamiento
está plegado, desabroche la hebilla para
abrirlo.
QUITANDO EL COMPARTIMIENTO DE
ALMACENAMIENTO
PASO 1: Asegúrese de que el compartimiento
de almacenamiento esté vacío antes de intentar
quitarlo de la Vagon Carriola.
MONTANDO EL COMPARTIMIENTO DE
ALMACENAMIENTO
PASO 1: Vaya al frente de la Vagon Carriola
y localice los puntos de montaje para el
compartimiento de almacenamiento
PASO 2: Apoye una de sus manos en la
defensa del carro y mueva el compartimiento de
almacenamiento en un ángulo. Tire hacia fuera en
ángulo para quitarlo de la Vagon Carriola.
PASO 2: Coloque el compartimiento de
almacenamiento en un ángulo que coincida
con los puntos de montaje. Presiónelo para
que se asegure al marco. Asegúrese de que los
soportes queden alineados correctamente.