EasyManua.ls Logo

Keepower Small User Manual

Keepower Small
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Small, Medium, Large and XL-Con
Keepower Battery Charger
User guide
Question and Answer IconNeed help?

Do you have a question about the Keepower Small and is the answer not in the manual?

Keepower Small Specifications

General IconGeneral
BrandKeepower
ModelSmall
CategoryBattery Charger
LanguageEnglish

Summary

Keepower Charger Kits

Small 1A or 4A/12V Medium 8A/12V

Details the Small (1A/4A) and Medium (8A) 12V charger kit components.

Large 15A/12V

Details the Large 15A/12V charger kit components.

XL-Con 30A/12V 15A/24V

Details the XL-Con 30A/12V and 15A/24V charger kit components.

Safety Instructions

General Safety Precautions

Essential safety advice for operating the battery charger, including handling acid and ventilation.

Device Indicators and Modes

Battery Indicator

Explains the LED indicators for battery charge level: Full, Medium, Low, Discharged, Deep Discharged.

Error Indicator

Details the LED indicator used to signal charging errors or faults.

Charging Modes Overview

Provides an overview of the different charging modes available for various Keepower charger models.

Charging Mode Selection

Normal Charging

Details normal charging for various battery types and voltage limits.

Bike Charging

Describes the 'Bike Charging' mode, similar to normal charging but with a 1A current limit.

Cold Charging

Explains cold charging for batteries below 5°C and for AGM batteries.

Supply Mode

Describes 'Supply mode' for using the charger as a power supply without motor running.

Boost Mode

Details the 'Boost' mode for kick-starting low-power batteries.

Battery Charging Procedure

Detecting Battery Condition

Step-by-step guide on how to detect the battery's condition before charging.

Charging the Battery

Step-by-step guide on connecting and initiating the battery charging process.

Keepower Charger Variants

Charger Installation Positions

Illustrates the four different positions the charger can be installed in.

Intelligent Charging Curve

Soft Charge

Phase for deep discharged batteries, charging until ready for normal charging.

Desulphation

Phase for batteries not used for a longer period.

Bulk Charging

Phase where battery is charged with constant current to 85% capacity.

Absorption

Phase where battery is charged at constant voltage to 98% capacity.

After Charging

Phase where battery is charged at constant voltage to 100% capacity.

Testing Phase

Phase where the battery is tested for a defect battery cell.

Maintenance Phase

Phase to keep the battery fully charged over a long period.

Boost Phase

Intelligent boosting phase to kick-start low-power batteries.

Error Indication

Warning Flashing

Indicates errors like disconnected clamps or mains issues.

Warning Constant

Indicates errors before or during charging, like over voltage or wrong polarity.

Product Features

Flash Light

Details the built-in flash light for dark room use.

Keepower XL Version Features

Describes the temperature sensor and USB connection specific to the XL version.

Guarantee Information

Information on how to obtain guarantee service, requiring valid proof of purchase.

Technical Data

Related product manuals