Keithley 2260B-30-72 - Page 13

2260B Series Programming Manual
10
Function Keys
The Function keys along with the Output key will
light up when a key is active.
The Function key is used to
configure the power supply.
Set the overcurrent or overvoltage
protection levels.
Sets the current and voltage limits.
Used to run customized Test
sequence for testing.
Locks or unlocks the panel keys to
prevent accidentally changing
panel settings.
Toggles the display from viewing
V/AÆV/WÆA/W.
Display
Indicators
Voltage Slew Rate
Constant Volta
g
e Mode
Remote Control Mode
Alarm on
Dela
y
Outpu
t
Constant Current Mode
Current Slew Rate
Power bar
Indicates the current power output
as a percentage.