Keithley 2280S-60-3 - Power and Environmental Specifications

Carefully consider and congure the appropriate
output‑o󰀨 state, source levels, and compliance levels
before connecting the instrument to a device that can
deliver energy. Failure to consider the output‑o󰀨 state,
source levels, and compliance levels may result in
damage to the instrument or to the device under test.
Power supply
100 V/120 V/220 V/240 V AC,
50 Hz or 60 Hz
Operating altitude
Maximum 2000 m (6562 ft ) above sea level
Operating
temperature
0 °C to 40 °C, full accuracy to 80% relative
humidity at up to 35 °C, noncondensing
Storage temperature
-25 °C to 70 °C, 5% to 95% relative humidity
at up to 40 °C and 5% to 60% relative
humidity above 40 °C up to 70 °C
Pollution degree
2
Power and environmental specications
For indoor use only.
CAUTION