Need help?Do you have a question about the Keithley 2614B and is the answer not in the manual?
General| Type | System SourceMeter |
|---|---|
| Channels | 2 |
| Measurement Resolution | 6½ digits |
| Interface | LAN, USB, GPIB |
| Display | LCD |
| Voltage Resolution | 100 nV (6½ digits) |
Safety guidance for system integration and operation, highlighting potential hazards.
Instructions for connecting the instrument to AC power and ensuring compatibility.
Configure source function, range, and level for voltage output on SMU channel A.
Set the current limit for the voltage source to 10 mA.
Select the voltage measurement function and enable auto-ranging.
Activate the output and begin measurements.
Verify measured voltage against the set source value.
Deactivate the output after measurements are complete.
Troubleshooting steps for error messages when turning on the instrument.
Instructions on loading test scripts using the included USB drive.
How to download a replacement 2400 personality script.
To Next Page
