Keithley 4200-SCS Startup Guide

4
Model 4200-SCS
Step 5 Start KITE, open the “default” project, and select the “vds-id” test
A. Start KITE by double-clicking the following KITE icon on the Windows desktop:
Double-click to start KITE.
B. When KITE starts, the “default” project will open automatically if it has been set as the default project. If a
different project opens, perform the three steps in Figure 4 to open the “default” project. The Project
Navigator for the “default” project is shown in Figure 1.
NOTE If the Project Navigator is not displayed when KITE is started, click the
View menu and select the Project Navigator item. The View menu is
located at the upper left-hand side of the KITE window.
Figure 4: Open “default” project
1. From the File menu,
click Open Project.
2. Use the browser to select
the default project*.
3. Click Open to open
the “default” project.
* When browsing, use the following directory path to locate the “default.kpr” project file:
C:\S4200\kiuser\Projects\default\default.kpr

Keithley 4200-SCS Specifications

General

Brand	Keithley
Model	4200-SCS
Category	Semiconductors
Language	English