FAQs
How should I clean the front-panel display?
If you need to clean the front-panel LCD touchscreen display,
use a soft dry cloth. If necessary, use a cloth dampened with an
ammonia-free glass cleaner. Do not spray cleaning fl uids onto the
display. Additionally, it is strongly recommended that you use only
fi ngers on the touchscreen. Do not use sharp objects, such as a
pen or pencil, to touch the touchscreen.
My data looks odd or is wrong. What should I do?
Verify the connections from the instrument to the test fi xture. Also
check the connections from the DUT to the test fi xture socket.
I cannot unplug the mini-triaxial cable (4200A-MTRX) from
the SMU. What should I do?
The mini-triaxial connector is a locking connector. To remove it,
pull the knurled part of the connector back.
A confi guration error has been detected and I cannot
launch Clarius. What should I do?
This occurs when the physical confi guration does not
match the KCon defi ned confi guration or when there are
communication problems between instruments and the
4200A-SCS.
To verify system confi guration:
1. Run KCon.
2. Select Validate Confi guration.
This can also occur if the preamplifi er or RPM is removed or
reconnected.
To update the system confi guration:
1. Run KCon.
2. Select Upgrade Preamp, RPM, and CVIV Confi guration.
Note that preamplifi ers are SMU specifi c. For example, a
preamplifi er that is confi gured for SMU1 cannot be connected
to SMU2.
To Next Page
Loading...
Need help?
General
