Unpack and inspect the instrument
To unpack and inspect the instrument:
1. Inspect the box for damage.
2. Open the top of the box.
3. Remove the documentation, standard accessories, USB
fl ash drive, and optional accessories (such as rack-mount
hardware).
4. Remove the packaging insert.
5. Remove the 4200A-SCS.
6. Inspect the instrument for any obvious signs of physical
damage. Report any damage to the shipping agent
immediately.
The 4200A-SCS is heavy and requires a two
person lift since it weighs approximately 27
kilograms (60 pounds). Do not lift the 4200A-SCS
alone and do not lift the 4200A-SCS using the
front bezel. Lifting the instrument by the front
bezel can cause instrument damage.
To Next Page
Loading...
Need help?
General
