R
Relative 2-10
Remote Operation 3-1
Resistance measurements 1-14
Resistivity measurements 1-17
Resolution 2-16
RS-232 connections 3-4
RS-232 interface selection and configuration
3-5
RS-232 standard 3-3
Running a test 2-25
S
SCPI command syntax 3-8
SCPI commands 3-7
SCPI signal oriented commands 3-10
SCPI subsystem commands 3-11
Selecting and configuring a test sequence 2-23
Selecting and configuring math 2-21
Software support 3-2
Specs and Accessories 4-1
Speed 2-15
Status register 3-17
Storing readings 2-19
Storing readings in buffer 3-24
T
Taking readings with the scanner card 3-26
Temperature units 1-23
Test Sequence — staircase sweep 3-28
Test sequences 2-23, 3-16
TestPoint application software 3-2
Trigger connections 2-28
Trigger model 3-15
Triggering 2-12
V
Voltage measurements 1-10
Voltage source 2-8
V-Source 3-14
W
Warm-up 1-8
Z
Zero check 2-11
Zero correct 2-11
To Next Page
Loading...
