Model 6517A Getting Started Manual Front Panel Operation 1-5
6 OPERATION KEYS
Z-CHK Enables/disables zero check. Enable zero check before changing functions.
REL Enables/disables relative reading
FILTER Displays digital filter status for present function and toggles filter on/off
MATH Displays math calculation and toggles math on/off if configured
TRIG Triggers unit
SEQ Performs selected test sequence
and
Moves cursor among data entry digits, menu selections, and information displays
INFO Shows context-sensitive information about the present display
LOCAL Cancels remote operation
STORE Enables data storage
RECALL Displays reading data (reading, number, time). Use PREV/NEXT DISPLAY for maxi-
mum, minimum average, standard deviation.
CONFIG Configures functions and operations
MENU Saves/restores instrument conditions; sets up communications; performs calibration
and self-tests; defines limits, digital output, and other miscellaneous operations (see
Table 2-2)
EXIT Cancels selection, moves back within menu structure
ENTER Holds reading, enters selection, moves down within menu structure
7 VOLTAGE SOURCE KEYS
OPER Toggles V-source between operate and standby
and
Adjusts V-source value
8 VOLTAGE SOURCE OPERATE
Indicator on when in operate, off when in standby
9 OPTION CARD KEY
Use to program and operate an installed option. Also used to scan
external scanner channels.
To Next Page
Loading...
Need help?
General
