Keithley 7001 Quick Reference Guide

9
The scan can be terminated at any time by pressing the
OPEN ALL key. All closed channels will open and the
Model 7001 will return to the idle state (ARM indicator
off).
IEEE-488 operation
Over the bus, a scan is configured using the :TRIGger
subsystem commands.
Send the following command to take the Model 7001
out of the idle state and begin a scan:
:INITiate
The scan can be terminated by sending the following
command:
:ABORt
All closed channels will open and the Model 7001 will
return to the idle state.
Store and Recall
Up to 100 channel patterns can be stored in memory. A
channel pattern is simply a displayed pattern of open
and closed channels.
Front panel operation
1. Close the desired channels.
2. Press STORE and enter the desired memory loca-
tion (1 to 100).
3. Press ENTER.

Keithley 7001 Specifications

General

Brand	Keithley
Model	7001
Category	Switch
Language	English