Keithley S530

Section
3: LPTLib command reference S530/S540 KTE Linear Parametric Test Library (LPTLib) User's Manual
3-6 S530-900-01 Rev. E / September 2017
General commands
Command Description
devclr (on page 3-26)
Set all sources to a zero state.
devint (on page 3-26)
Reset all instruments and clear the system.
getlpterr (on page 3-30)
Get last LPTLib error since devint command.
getstatus (on page 3-31)
Return operating status of instrument.
insbind (on page 3-32)
Establish a cooperative relationship between two
instruments.
setmode (on page 3-74)
Set operating mode.