To Next Page

To Previous Page

PROGRAMMING THE E30

For a description of the functions of the buttons and lights,

please read pages 2 and 3 of this manual before proceeding.

RESTORING FACTORY DEFAULTS (Purging the Settings)

Provided the E30 in unlocked, you can restore its default factory settings

at any time by pressing and holding down the (P) button and pressing and

then releasing the (R) button. Once the (R) button has been released,

release the (P) button. The screen then displays

SETTINGS CLEARED

PRESS P.

Doing this removes any settings you may have entered and

restores the E30 to its default state.

LOCKING & UNLOCKING THE E30

The E30 is supplied by the factory in an unlocked state and can be

programmed using its buttons. To prevent unauthorised personnel from

altering its settings, the programming button (P) can be locked.

LOCKING THE E30

To activate the lock, press and hold down the (˄) and (˅) buttons and then

press and release the

(R) button. Continue to hold the (˄) and (˅) buttons

down until the screen displays LOCK. (takes about 2 seconds) release

the (˄) and (˅) buttons. The E30 is now locked. When locked, pressing

the

(P) button will not allow access to the E30’s menu, instead a message

PROGRAM LOCKED PRESS RESET is displayed on the screen.

UNLOCKING THE E30

To unlock the E30 repeat the above procedure, press and hold down the

(˄) and (˅) buttons and then press and release the (R) button. Continue

to hold the

(˄) and (˅) buttons down until the screen displays UNLOCKED.

(takes about 2 seconds) release the (˄) and (˅) buttons.

KELCO E30 User Manual

Other manuals for KELCO E30