ENGLISH
21
X3
Overload Lamp
| When overload to handpiece,
working stops and lamp
turns on
| To restart, turn it
off and turn on again
3.2 LED LAMP Detail
3.3 Overload Prevention Function
Red light will turn on the overload prevention lamp when excessive power is
applied on the handpiece. Turn the power down and then start again.
4.1 Battery Recharge
a When the red light turns on the battery lamp, please use after recharging.
b Connect the recharger as shown on the picture of page 7.
c When recharging the battery, please keep the followings without fail.
4. Battery
Built-in battery at the inside of controller is Lithium-Ion Polymer type battery
that is rechargeable.
Power Lamp
| Lighting when turn on
| Lighting when On/Off
pedal working
| Full charge: Green Light
Less charge: Red Light
Battery Lamp
| Total 3 lamps
| 3 lamps lighting when
over 60% charged
| Each one turns off
as using
Power Lamp
| Lighting when turn on
| Full charge: Green Light
Less charge: Red Light
To Next Page
Loading...
Need help?
General