c
c
ENGLISH
22
X3
Step 1: Disassemble screws and the cover
Step 2: Disassemble speed control knob
Step 3: Take out PCB board from the case
Step 4: Disconnecting battery cable and
replace new one
a
b
c
d
Environmental condition when recharging
| Temperature should be 0–40 °C
| Place where ventilation is good
| Place where there are no inflammables such as gasoline
Others
| Please do not put anything on the controller
| Please use the designated adaptor only that is included in the product
| Please do not disassamble by yourself
4.2 Battery Exchange
Rechargeable batthery has limited times of recharging therefore it needs to
be exchanged after certain period of time.
Battery cannot be exchanged by the customer and must be only done by
authorized service provider.
For more detailed information, please contact our head office or shop
where you bought.