Kellfri 35-RKATV117 - ASSEMBLY INSTRUCTIONS; Installation of the gas tank and support frame; Install the draw bar


ASSEMBLY INSTRUCTIONS
STEP : Installation of the gas tank and the support frame
. Assembly the support frame ( parts , , ), lock in place with  Mx () and
lock nut M ()
. Mount the tank on the frame, lock in place with Mx (), spring disc Ø () and large
disc Ø ()
. Mount the stabilizer bar () for stabilizing the frame (A-A), lock in place with  Mx
() and lock nut M ()
Step: Install the draw bar
. Install the draw bar in the desired position on the mower (see picture), lock in place with 
bolts M x () and M lock nut.
POSTION 
STRAIGHT FORWARD
POSTION 
FROM THE SIDE