EasyManua.ls Logo

Kellfri 35-RKATV117 - OPERATING THE MACHINE; CONNECTING

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Learn and remember the correct working methods. Beginners should always keep a low
speed, use extreme caution before routine and product knowledge is achieved. The user/cus-
tomer is responsible to handle the situation correctly. The product should not be taken into
use unless it can be done in a safe way for the user.
Warning!
Never use faulty safety equipments!
Ensure that all nuts, bolts and ttings are securely attached, that all gasket /
transport equipment such as tape, steel tape, rope, etc. are removed.
Make sure there is proper oil level in the engine and that there is petrol in the
tank.
Make sure there is proper tire pressure. Max 2.06 bar / 30 psi
Ensure that all guards are in place and not come o before use.
Check that the blades are not defective, replace if necessary.
Check and clear mowing area from harmful objects such as stones, branches,
etc. before starting the work .. The machine must not be used in rocky terrain.
OPERATING THE MACHINE
Only people who understand the safety information and instructions in this manual may op-
erate the equipment. Be alert and careful when working with the machine and only use the
tool or product in the manner described in this manual. When working with equipment that
has moving parts, there is always the risk of injury. Be careful when working with equipment
equipped with hydraulic hoses ,oil under pressure can penetrate the skin. Seek medical at-
tention immediately if this occurs. Always work alone with the tools that are dened as single
porpose tools. Respect the equipment’s danger zone.
CONNECTING
Plug the rough mowers ball coupling to the ATV’s towing ball.
Reduce speed when working on slopes and uneven terrain.
Be aware that dierent parts of the machine may be hot after use.
Follow the guidelines that the ATV manufacturer provides regarding towing / pulling
equipment / tools.
Be careful when you ll the tank with fuel, in particular if any parts are hot.
The rough mower is designed to make a safe and reliable job if used as
instructions and for its intended use. Read and understand this manual before using the mow-
er, if not followed, it may result in personal injury and / or damage to the equipment. When
driving, always use ear protectors. During normal operating conditions, it is normally with a
noise level of 83 decibels, in this case, protection recommended.