Need help?Do you have a question about the Kelly KLS4812S and is the answer not in the manual?
Provides a general introduction to the Kelly KLS-S controller, its features, and manual usage.
Lists and explains the diverse functional capabilities and operational modes of the KLS-S controller.
Highlights the main technical attributes and design elements of the KLS-S controller.
Details the technical specifications, including operating ranges, current, and voltage ratings.
Clarifies the naming convention used for Kelly BLDC motor controllers, explaining model designations.
Guides on the proper physical mounting and installation of the controller for optimal performance and heat dissipation.
Provides detailed pin definitions and wiring diagrams for connecting the KLS-S controller to various components.
Outlines a crucial checklist for verifying correct installation and pre-operation setup before powering on.
Details the initial set of programmable parameters, focusing on voltage limits and current settings.
Covers the second stage of programmable parameters, including motor characteristics and sensor types.
Explains the third group of programmable parameters, focusing on acceleration, braking, and timing controls.
Provides essential instructions on performing the Identification Angle operation for controller-motor compatibility.
Describes the recommended procedures for the exterior cleaning and maintenance of the controller.
Explains how to connect and configure the controller using PC software or Android APP.
Provides a general introduction to the Kelly KLS-S controller, its features, and manual usage.
Lists and explains the diverse functional capabilities and operational modes of the KLS-S controller.
Highlights the main technical attributes and design elements of the KLS-S controller.
Details the technical specifications, including operating ranges, current, and voltage ratings.
Clarifies the naming convention used for Kelly BLDC motor controllers, explaining model designations.
Guides on the proper physical mounting and installation of the controller for optimal performance and heat dissipation.
Provides detailed pin definitions and wiring diagrams for connecting the KLS-S controller to various components.
Outlines a crucial checklist for verifying correct installation and pre-operation setup before powering on.
Details the initial set of programmable parameters, focusing on voltage limits and current settings.
Covers the second stage of programmable parameters, including motor characteristics and sensor types.
Explains the third group of programmable parameters, focusing on acceleration, braking, and timing controls.
Provides essential instructions on performing the Identification Angle operation for controller-motor compatibility.
Describes the recommended procedures for the exterior cleaning and maintenance of the controller.
Explains how to connect and configure the controller using PC software or Android APP.
General| Model | KLS4812S |
|---|---|
| Input Voltage | 48V |
| Rated Voltage | 48V |
| Output Current | 120A |
| Max. Battery Current | 120A |
| Voltage | 48V |
| Current | 120A |
| Phase | 3-phase |
| Protection Level | IP65 |
| Throttle Input | 0-5V |
| Weight | 1.5kg |
| Power | 5.8kW |
| Control Type | FOC (Field Oriented Control) |
| Communication Interface | UART |
To Next Page
