To Next Page
А
АлександрAug 27, 2026
Какая программа нужна для настройки контроллера
Какая программа нужна для настройки контроллера
Introduces the KLS-H waterproof controller, its features, installation, and maintenance.
Lists various functionalities like fault detection, battery monitoring, current protection, and I/O ports.
Details features like microprocessor, SVPWM/FOC, electronic reversing, and voltage monitoring.
Lists operational frequency, current ratings, voltage ranges, and input signals.
Explains the naming convention (KLS, 72, H, C) for Kelly BLDC motor controllers.
Provides guidelines for mounting the controller, emphasizing heat sinking and airflow for optimal performance.
Details the pin definitions and various connection types for the controller.
Outlines a pre-operation checkout procedure to ensure correct installation and safety.
Covers initial parameter settings like Low Volt, Over Volt, and Current Percent.
Details parameters for speed sensor type, motor poles, and temperature sensors.
Explains parameters related to braking, acceleration, and torque control.
Guides users through the essential identification angle setup process for motor compatibility.
Provides instructions for the exterior cleaning of the controller.
Explains how to configure the controller via PC or Android using RS232 or USB.
General| Rated Current | 22A |
|---|---|
| Weight | 1.2kg |
| Motor Type | BLDC |
| Operating Temperature | -20°C to 60°C |
| Current | 22A |
