10
European Community Declaration of Conformity
according to European Community machine standard 89/392/EWG, appendix II A
The manufacturer:
KEMPER GmbH
Von-Siemens-Str. 20
D-48691 Vreden
confirms that the construction of the following machine (or system or part of machine, etc)
Description, Name
KEMPER Dusty
with manual filter cleaning (Extraction unit, welding)
Part-No. 63 100
for connection of two ports NW 45
is confirm with the regulations of the machine standard 98/37/EG, also confirm all modifications
and confirm with the following regulations of the European Community:
89/392/EWG, 91/368/EWG and 96/44/EWG European Community machine standard
89/336/EWG and 92/31/EWG EMV standard version
87/404/EWG and 90/488/EWG Regulation for compressed air reservoirs
73/23/EWG Regulation for low voltage
93/68/EWG Regulation for labelling
Applicable harmonized standards, especially
EN 292 part 1 and part 2 Security of machinery
EN 50081 part 1 Law referring to the electromagnetic
Transmission of devices
EN 61000-6 part 2 Law to the electromagnetic
consistency of devices
Applicable national and technical specifications, especially
VDE 0100 Construction of power plants with a nominal voltage of up to 1000V
VDE 0113 Electrical equipment of industrial machines
UVV VBG 1 General regulations
Confirmed in: D - VREDEN
Confirmed on: 04. Mai 2005
Signee: Dipl.-Ing. Manfred Könning
(Chief Technical Engineer)
To Next Page
Loading...