Need help?Do you have a question about the Kemper ProfiMaster KE 60650100 and is the answer not in the manual?
ProfiMaster designed to recognized safety rules. Danger arises from untrained personnel, misuse, or improper servicing.
Personnel must read/understand manual, wear PPE (shoes, glasses, gloves), avoid loose clothing/hair, and report safety changes.
Maintenance/troubleshooting only when off. Tighten screws, clean connections. Use torque wrench if required.
Residual risks include serious injury to respiratory tract/organs and skin irritation, requiring PPE and proper operation.
Only appoint persons familiar with the task. Personnel must be instructed and understand the manual and company-specific instructions.
Details front panel components: on/off switch, signal lights, follow-up time control, maintenance jack, and connection options.
Position hood 25 cm diagonally above weld for adequate capture. Consider thermal movement and suction range.
Details filter life, recommended intervals, and procedure for replacing prefilter and main filters. Use original parts only.
Provides a table of common problems (e.g., no smoke captured, signal horn, dust emission), causes, and corrective actions.
ProfiMaster designed to recognized safety rules. Danger arises from untrained personnel, misuse, or improper servicing.
Personnel must read/understand manual, wear PPE (shoes, glasses, gloves), avoid loose clothing/hair, and report safety changes.
Maintenance/troubleshooting only when off. Tighten screws, clean connections. Use torque wrench if required.
Residual risks include serious injury to respiratory tract/organs and skin irritation, requiring PPE and proper operation.
Only appoint persons familiar with the task. Personnel must be instructed and understand the manual and company-specific instructions.
Details front panel components: on/off switch, signal lights, follow-up time control, maintenance jack, and connection options.
Position hood 25 cm diagonally above weld for adequate capture. Consider thermal movement and suction range.
Details filter life, recommended intervals, and procedure for replacing prefilter and main filters. Use original parts only.
Provides a table of common problems (e.g., no smoke captured, signal horn, dust emission), causes, and corrective actions.
General| Category | Welding Accessories |
|---|---|
| Model | KE 60650100 |
| Type | ProfiMaster |
| Voltage | 230 V |
| Power Supply | 230 V |
| Filter Type | Pre-filter, fine dust filter, activated carbon filter |
To Next Page
