KEMPER 2-arm ProfiMaster
Extension to the User Manual – EN
Art. No. 150 2487 - 17 - Version: 0
We reserve the right to introduce technical modifications and make errors.
Valid as of: June 2015
6.2 Declaration of Conformity
with regard to the 2006/42/EC Machine Directive
Manufacturer: KEMPER GmbH
Von-Siemens-Str. 20
D-48691 Vreden
Mr Manfred Könning is the person authorised to draw up technical documentation.
We hereby declare that this machine conforms to all appropriate stipulations of the 2006/42/EC Machine
Directive.
Art. No. 60 650 DA (this number may be different,
if another version of the device is supplied)
Name: KEMPER 2-arm ProfiMaster
This machine also conforms to appropriate stipulations set forth in the following EC standards:
2006/42/EC Machine Directive
2004/108/E
C Electromagnetic Comp
atibility
2006/95/E
C Low Voltage Directive
93/68/E
EC CE Marking Directive
The following harmonised standards (or parts thereof) have been applied:
EN ISO 12100 parts 1+2, EN 294,
EN 349, EN418, EN 983
Safety of machinery
EN 1050 Machinery - Safety - Principles for risk assessment
EN 60204 -1
Electrical equipment of machines
EMVG
Electromagnetic Compatibility Act
EN 610000-6 part 3
General requirements concerning emissivity
EN 610000-6 part 2 General requirements concerning noise immunity
The following technical specifications (or parts thereof) have been applied:
VDE 0100 Low-voltage electrical installations
VDE 0113
Electrical equipment of machines – Explanations of EN 60204-1
UVV BGV A1
Health&Safety regulations: The basics of prevention
BGR 500 2.26
Welding, cutting and related processes
DIN 45635 Measurement of machinery loudness
Annex VIII to the 2006/42/EC Directive has been adhered to. Satisfying the requirements of the Low Voltage
Directive has been guaranteed acc. to Annex I, No. 1.5.1 to the 2006/42/EC Directive.
Additional information:
This Declaration of Conformity expires, in the cases of improper use or making structural changes we
(the manufacturer) have not approved of.
Vreden, 22nd June 2015
KEMPER GmbH
M.Sc. Eng. M. Könnings
To Next Page
Loading...
