To Next PageTo Next Page
Need help?Do you have a question about the Kemper ProfiMaster and is the answer not in the manual?
General| Max. flow rate | Up to 120 l/h |
|---|---|
| Water temperature | 5 - 38 °C |
| Dimensions (H x W x D) | 450 x 300 x 200 mm |
| Temperature Range | 5 - 38 °C |
| Dimensions | 450 x 300 x 200 mm |
| Power Supply | Not applicable (no electricity required) |
| Flow Rate | Up to 120 l/h |
Overview of the manual's purpose and importance for safe operation.
Notes on confidentiality and protection of intellectual property.
Guidance for the company on ensuring personnel are aware of manual contents.
Product design adheres to safety rules; hazards may occur if not operated properly.
Explains safety symbols like Danger, Warning, Caution, and Note for hazard communication.
Company's obligation to affix necessary markings and signs on the product and area.
Requirements for instructing personnel, proper use, and maintaining the product.
Safety protocols for service, maintenance, and troubleshooting, including access and checks.
Details specific hazards like welding fume particles and electric shock risks.
Plastics must be sorted and disposed of according to legal requirements.
Metals must be separated and disposed of by an authorized company.
Filter elements must be disposed of in compliance with legal requirements.
Declaration of conformity with EU directives and harmonized standards.
Declaration of conformity with UKCA directives and standards.
Specifications and performance data of the product models.
Diagrams and measurements of the product's physical dimensions.
List of available spare parts and accessories with item numbers.
Explains the product's purpose as a welding fume filter device and its operation.
Details the product's certification for welding fume class W3/IFA.
Differentiates product versions based on the number of extraction arms.
Specifies the intended application for extracting welding fumes and prohibited uses.
Outlines general requirements for ducting systems and recirculation based on the standard.
Lists specific processes and conditions that constitute misuse of the product.
Describes markings on the product and the company's obligation to add further signs.
Informs users about inherent risks remaining even when safety rules are followed.
Provides safety instructions and methods for transporting the product, including lifting hazards.
Specifies conditions for storing the product, including temperature and environmental requirements.
Details requirements for personnel and steps for assembling the product.
Defines the necessary qualifications and training for personnel operating the product.
Identifies and explains the function of the product's control panel elements.
Guides on how to position the extraction hood for effective fume capture.
Provides instructions and warnings for the initial setup and startup of the product.
Details routine care, cleaning procedures, and warnings about using compressed air.
Outlines the schedule and requirements for periodic inspection and servicing of the product.
Provides critical safety instructions for changing filter elements, including PPE requirements.
Step-by-step guide for performing filter changes, including safety notes and notes on IFA approval.
Lists common faults, their causes, and suggested solutions for the product.
Outlines immediate steps to take in case of fire or other emergencies involving the product.
