Kemper ProfiMaster - Intended Use

EN
1502763-02 - 54 -
Fig. 12:
Pos.
Designation
Pos.
Designation
1
Product for 1 extraction arm
2
Product for 2 extraction arms
Tab. 12: Distinguishing features – 1/ 2 extraction arms
• Version – product with 1 extraction arm – W3/IFA certified.
• Version – product with 2 extraction arms (optional) – not W3/IFA
certified.
3.4 Intended use
The product is designed to extract welding fumes from electric welding at
their source and filter them out. In general, the product can be used for all
work processes in which welding fumes are released. However, it is
important to ensure that no "sparks" are drawn into the product from, e.g.
a grinding process.
Dimensions and further product details which must be observed can be
found in the technical data.