Kemper ProfiMaster - Product Information; Functional Description; W3;IFA Certified Feature

EN
1502763-02 - 52 -
3 Product information
3.1 Functional Description
The product is a compact welding fumes filter device that extracts welding
fumes at the point where they are produced and extracts them with a filter
efficiency of more than 99%.
The extracted contaminated air is cleaned using a 2-stage filter method
and then fed back into the workspace.
The product is equipped with a flexible extraction arm whose extraction
hood is easy to move and is self-supporting in any position.
Fig. 11: Product description
Pos.
Designation
Pos.
Designation
1
Extraction hood
6
Handle bar
2
Extraction arm
7
Cable holder
3
Maintenance door
8
Swivel castor with brake
4
Filter insert
9
Rear wheel
5
Operating controls/Control
unit box
Tab. 10: Positions on the product
3.2 Distinguishing feature – W3/IFA certified
The product is manufactured in two versions:
• Version – non-IFA certified