Warning! Before opening or removing hatches, doors or cover plates, turn the main switch
to OFF position, turn off the power supply and wait about 2 minutes before continuing.
Ensure that the device is not energized before continuing.
Warning! Disconnecting the C-Series Charging Power Unit does not cut the AC supply to
the AC Satellite!
1.3 Operational Safety
It is mandatory to read this operating manual and follow its instructions.
The charging voltage is not present at the charging connector pins when the device
is not charging.
Any electrical work on the charging unit is only allowed to be carried out by an
authorized electrician.
Important notes for safe use
Straighten any loops in the cables.
Do not wrap the cables around the body.
Make sure that faulty and damaged cables and charging connectors are changed
immediately as they can cause risk of electical shock or fire.
The cable, plugs and other electric devices may be installed or replaced only by an
authorized electrician.
In case of any abnormal behavior of the equipment, such as smoke coming from the
CPU during normal use, stop the use instantly, turn the charger off and contact a
MANUFACTURER service representative to arrange an inspection.
1.4 Environment
The device shall be installed in a location whereas the ingress protection (IP)
classification and ambient operating conditions are within the limits to that of the
device.
Do not expose the device to high temperatures, as this may cause damage to the
device.
If possible, the charger unit should be mounted in such a location that protects it
from direct sunlight to prevent overheating and ageing of the technical parts.
Make sure the airflow to and from the CPU is unrestricted.
To Next Page
Loading...
