General maintenance
Maintenance of the wire feeder will normally consist of:
• Visible checking for possible damages
• General cleaning of the wire feeder
• Checking and cleaning of wire feeding mechanism and especially
consumable parts like wire guide tubes, feed rolls, gear wheels,
etc.
• Checking and testing of controlling components like switches and
potentiometers.
• Function testing
• Test welding
NOTE !
Only person who have electrical engineering competence (fulfil the
requirements of local laws and rules) and trained by Kemppi Oy is allowed to
make maintenance and possible reparations for Kemppi -products.
To Next Page
Loading...
