Product View:
1. Positive( + ) and negative( - ) polarity clamps
2. LCD display, which displays the battery voltage or percentage of the charging battery.
You can select the item display by press the “Display” button
3. LED light to display which display item is selected.
4. LED light to indicate charging process, if the light flicks, it means that the charger is
running at battery fixing stage. Once the battery fixing stage is finished, the light will
become always on status to indicate that the charging process is running. And the LED
light will be off and the LCD disply”FUL”, once the battery is fully charged.
5. Red LED light up：means the output clamps is wrong connected. You should connect
red clamp to the positive terminal of the battery and black one to the negative.
6. Charging battery select button, according to the battery you connect,
you can push the “Battery” button to choose different battery types and charging voltage
6V or 12V. If wrong charging voltage is selected, the LCD display will display”FUL” and
there will have no output current
7. LED Display and Engine Start function seclect button, according to
To Next Page
Loading...
