To Next Page
R
Ryan CummingsAug 10, 2025
Why is my Kenmore 110.2022*410 Washer vibrating or off-balance?
- RRenee CooperAug 10, 2025
Your Kenmore washer might be vibrating or off-balance due to several reasons. The feet of the washer may not be in contact with the floor or properly locked. Ensure the front and rear feet are firmly on the floor, and that the washer is level. An unbalanced load can also cause this issue; load dry items in loose heaps evenly around the basket wall. Avoid tightly packing the washer and avoid washing single items. For oversized, non-absorbent items like comforters, use the Deep Wash cycle.
General
