iii_i _ii/_: _L_ ¸ •
=control regulates the width of the stitch you select° THE HIGHER THE
i:: NUMBER-THE WIDER THE STITCH° You may vary your zigzag stitch width
by adjusting this control to the setting you desire.
_This control must be set on "'0" position in order to do straight stitching°
........
: iThe stitch length control regulates the length of the stitch you select, THE
IIGHER THE NUMBER_THE SHORTER THE STITCH.
;L................. i
The number on stitch length control indicates the approximate number of stitch_
inch° The stitch setting you use will be determined by the thickness of the
:fabric you are sewing,
i
longer stitch setting should be used for thicker fabric or more layers of fabric.
,: Themiddle range of the control is the t0-12 stitch per inch range which is the
;ommonly used,
basting stitch is made by using the longest possible stitch setting-6 stitches per
green marking _ on the control is the setting used for the
stitches such as in Satin Stitching.
; marking
on the control is the setting used for darning or embroider-
To Next Page
Loading...
