4' ,4
_t
vvv vvVVVV',
SETTIBiGS
Stitct_ Selectol ...........
Stitch Width Control ......
Stitch Length Control ....
Stre_ch Sdtch Control , ,
Zigzag Presser Foo_:
5
White Zone
Horizontal
To repair a straight or three-cornered
tear, position the tear under the needle
in such a way that the stitching catches
both sides of the tear. When mending a
three-cornered tear, stitch from each
end to the center. It is well to use a
piece of fabric under the tear for rein-
forcement.
b_!;C_ VViC]{;"i .,O_uuI
St;,:ch Le ng th Co nlLro I o
.... _,to "t0
St_e-tch Sdtciq Control . . . Horizontal
;::'resset- Foot P_-essure, - 0
4_g __ag Poor
Stretch fabric between embroidery
hoops with hole centerd. Lower
presser bar and sew at a slow speed
moving fabric back and forth with a
steady rhythm to cover darning area.
When it is covered, turn fabric I/4 a
turn and sew layer of stitching across
first layer,
If fabric is thin or badly damaged in
hole area, you may want to put a
separate piece under the hole for
reinforcement.
To Next Page
Loading...
