G
i
To change the various presser feet,
raise the presser bar to its highest posi-
tion by lifting the presser foot lever°
Loosen the presser foot thumb screw,
choose the proper foot, insert from
the bottom. Tighten the screw using
the large screw driver to make certain
the foot is secure.
A B C D
You have been given a variety of presser feet:
Ao Zigzag Foot
B. Satin Stitch Foot
C° Zipper Foot
D. Buttonhole Guide Foot
NOTE:
Additional feet and attachments are available at most large retail stores or
through the catalog. Please select attachments for left needle position with
low bar.
To Next Page
Loading...
