1 To install the machine in cabinet,
position machine head on cabinet
platform so that holes on bottom of
machine match those on boards.
Insert washers and screws and tighten
into place. (Fig, 1)
2, To install machine in portable carrying
case. simply slip machine into base,
making certain the machine and the
words Front in the case face you,
(Fig_ 2)
Place cover on machine with words
,
,
"Sears" on handle facing you. The
case slopes in the same direction of the
machine. (Fig. 3)
Push the speed control plug onto
three-prong connector, Plug machine
cord into any 110-120 volt wall outlet.
Turn on power by pushing light and
power switch. (See Fig. 4)
Screw spool pins firmly into place with
a screwdriver. Place nylon discs on
spool pins, Discs and pins are packed
in the accessory box,
To Next Page
Loading...
Need help?
General
