To Next PageTo Next Page
Need help?Do you have a question about the Kenmore 153.33114 and is the answer not in the manual?
General| Brand | Kenmore |
|---|---|
| Model Number | 153.33114 |
| Type | Electric Water Heater |
| Capacity | 40 gallons |
| Voltage | 240V |
| Wattage | 4500 watts |
| Warranty | 6 years |
| Fuel Type | Electric |
Key terms for understanding installation and service procedures.
Essential guidelines for safe operation and installation.
Procedures and contact information for obtaining warranty repairs and support.
Crucial details regarding installation, operation, and safety.
List of common tools required for installation and maintenance.
Specialized tools for soldering connections during installation.
Identification of key components and parts of the gas water heater.
A comprehensive checklist to ensure proper installation and system readiness.
Step-by-step guide for safely disconnecting and removing the existing water heater.
Guidelines for selecting an appropriate and safe installation location for the water heater.
Information on matching the gas type to the water heater's rating plate.
Guidelines for installing gas piping in accordance with codes and best practices.
Procedures for leak testing gas supply lines and ensuring correct pressure.
Specific safety warnings and information for Liquefied Petroleum gas installations.
Requirements for combustion air in open areas based on appliance input.
Requirements for combustion air in enclosed spaces, including openings.
Methods for supplying outdoor air for combustion in confined spaces via ducts.
Considerations for calculating free area with louvers and grilles for air supply.
Instructions for properly installing the draft hood onto the water heater.
Guidelines for selecting and installing vent connectors, including clearances.
Steps for connecting water inlet and outlet pipes, including material recommendations.
Importance, installation, and operation of the T&P relief valve.
Detailed steps for safely lighting the pilot and main burner.
How to adjust water temperature and safety considerations.
Interpretation of status light codes for diagnosing operational issues.
Regular checks for obstructions, damage, and leaks in the venting system.
Procedures for cleaning the burner to ensure efficient combustion.
How to inspect and maintain the anode rod for tank corrosion protection.
Steps to drain and flush the tank to remove sediment and prepare for freezing.
Information on ordering necessary replacement components for the water heater.
Guide for cleaning the base-ring filter to maintain proper airflow and operation.
Steps for safely removing the manifold and burner assembly for maintenance.
Detailed instructions for replacing the gas control valve and thermostat.
Common issues encountered during initial startup and their resolutions.
Understanding and managing pressure increases due to water heating.
How to check and ensure proper functioning of the draft hood.
